TG010-OTP10�� OTP����оƬ ��Ʒ����

��Ʒ����:

    TG010��һ��֧��PWM��DAC�����10���OTP����оƬ,����Ч���ã������ĸ�I/O��,����2��Input,2����I/O,��I/Oֻ�ܴ�������������������������ƣ���Χ����һ��104���ݣ���Ʒ�����ɱ�����.AC �� AC

DataSheetԭ��ͼTG010����   --  TG010ԭ��ͼ AC

Description

TG010 is a 10 Sec Easy Use Speech IC .It Support PWM or DAC voice output with high quality speech , There are 10 second Voice Length under 6 KHz sampling and 4 bit hardware compression. Its internal built-in a oscillator for system clock without an external resistor. Maximum 63 voice groups. One Group contain several steps(voice section ); Maximum 700 steps for all the Groups. Each Step can be define Trigger Mode, Output Status, Voice Section, Mute length, I/O Type & Simple Programming Function. User can select 8bit / 5bit / 4bit data compression. Support three mode trigger IC (Stand Alone, Serial Trigger Mode, CPU Command Mode ). Easy use development system is for function selection and voice combination . PC download the ROM code by the USB Port .

Functions

1. MAX voice file : 700
2. MAX Trigger Groups : 63
3. Power On Trigger Group :1
4. MAX Step : 700
5. Signal step mute length : 0.64 s ( 6k sample rate )
6. Operating Voltage range: 2.4V ~ 3.6V
7. Total Voice Duration : 10�� (60K Samples)
8. I/O pin : 4
9. Voice output : PWM or DAC
10. Sequential Key : TG1 -> 32 Groups.

TG2 -> 29 Groups.
TG3,TG4-> 1 Group

1. Debounce time : 50 us or 10 ms
2. On/Off function : only for all TG PIN
3. Sequential Key for Volume control function.
4. Step can change Trigger I/O Type, Trigger Mode & Output Status.
5. Hardware Trigger Group Repeat function.
6. Simple Programming Function :
1. (a) Write data to working register.
2. (b) Working Register Increasing.
3. (c) Step Jump by Working Register / Volume Status.

1. Three Mode Trigger IC :

- Key Stand-alone Trigger Mode :

1. Edge/Level
2. Hold/Unhold
3. Retrigger/Irretrigger

1. Serial Trigger Mode :

Combinations of TG1 and TG2 to trigger maximum 63 Voice Group.

1. CPU Command Mode :

User command through TG1,TG2,TG3 & TG4 with serial CPU Interface to control the Multi-Playback function.

• Output status (for each Output pin):
• Stand by Status. (High/Low Status)
• Busy Low Active.
• Busy High Active.
• LED Flash at 6 Hz.
• LED Flash at 3 Hz.
• LED Flash at 1.5 Hz.
• LED Flash at 0.75 Hz.
• PWM for LED Dimming Control.

��

��Ʒ���ƣ�

1, Otp-TG010 ���õ��衢��Χû��Ԫ��������Χ��·ֻ��ҪҪ104���ݣ�

�������������ķ��ø�����ʡ30%��50% .

2, ������ѹ2.4V��3.6V�������ʽ��PWM��DAC .(Ӧ����5V����ʱ����Ҫ��LDO��ѹоƬ)

3, �����г�Ψһһ��8Pin��DIP,SOP��װOTP����оƬ.AT@CHIP

4, Ψһһ�������¼��Ƭ������OTP����оƬ��Ʒ,������ַ�,���ʺ͵����г�����.

������ʽ��

dip�� SOP��COB����Ϊ��ѹ��ר�ã�����Ƭ������¼�ã��� ������Ƭһ��Wafer����ͬʱ��¼4�ͬ�IJ�Ʒ��ֱ�Ӱ����������ؽ�Լ����ʱ��, dip�� SOP��COB 1�콻������Ƭ5-7�콻����

 

һ������¼����оƬ/OTP������������

��ز�Ʒ��AC8040-OTP40��   AC8020-OTP20��   AC8080-OTP80��

���²�Ʒ: AC9020-OTP20�� AC9080-OTP80�� AC9010-OTP10��

Other: TG010 TG020 TG040 TF020 TF040 TH040 TH080

�²�Ʒϵ��OTP����оƬȫ��֧��4.5V��3V,Ϊ���ṩ����ȶ����������.

����оƬ��Ƭ�����������Ŷӽ߳�Ϊ������ͬʱ���ǽ�����õIJ�Ʒ�����ͼ۸�Ϊ����������ҵ�������õIJ�Ʒ��Ч�档��ӭ������ѯ!

����ƽ�Ȼ���ԭ���ڴ�����Я�ֺ����������Ի͡�

����оƬ��Ƭ������         TG010-OTP10��